Search
Thursday, November 21, 2024 ..:: PAQ » Cold Air Return from Interior Wall ::.. Register  Login
gtag.js

How is duct work supposed to be covered when coming into attic from furnace?
It must be insulated – that’s all…

How to cut 14 x 20 hole in furnace for cold air?
Learn how to do it in Chapter #37 of my Ductwork Installation Guide book.

How to install ceiling tiles around A/C vents?
Learn how to do it on this page.

How to put a register in spiral ducting?
You have to use special register boxes.

How to save money on ductwork installation?
Just do it yourself

How to seal gaps around my furnace?
You can use silicon or aluminum tape.

Sheet metal elbow as small gap coming off kitchen exhaust fan, how to seal back pressure?
You can use silicon or aluminum tape.

What are the benefits of adding a larger air return in basement?
Well, I do not see any benefits at all. But this is a complicated issue and if you have one please contact me from this page.

What is the difference between a "take off" and a "starting collar" in ductwork?
Take-off has 90* shape and reduced size, when collar is straight in shape.

What to do about rusty furnace ducts?
Replace them.

What type of tools I can use to cut spiral duct?
A saw-zall.

What’s the best way to seal exhaust ducts from jenn aire?
You can use aluminum tape.
                      Cold Air Return from Interior Wall

List of materials needed for the project:

                     

  Single Sheeting                     14” x 6” Cold Air Frame    Round 90*
 

   

  6” Pipe                                     Silicon
 

½” Screws, Sheeting Nails. 10” Drive

List of the tools needed for the project:

   

Cordless drill                          Replaseble-blades snips         Red aviation snips

 

    

Green aviation snips                Hand notcher                         Hammer

 

     Screwdriver                       Tape measure                                18” folder

 

 

Magic marker                  Caulk gun
 
In order to better organize an explanation of the execution of this project I would like to divide it into several steps:

Step #1 – Panning of the open stud space:

P. 1                                                                     P. 2

As you can see it in P. 1, the Builder was planning to make a drywall ceiling. That means that all the stud spaces above will be open. Therefore, your task is to make a duct from of one of the stud spaces. In order to do this you have to do following:

  • Make a measurement from the top of the top plate to the bottom of the drop ceiling and add 1”.....

This is a parent page. If you would like to read more you can buy an access to the secondary page for only $2.50.You can pay right here on this page by using the Buy Now button below. 
 
Installation on the paid page might not exactly describe your upcoming project. However, it will give you an important example of how this type of installation should be done. In addition, it will open the gates for as many questions as necessary to make sure that the job is done right.

In order to gain an access to the secondary page you have to pay the access fee of $2.50. Just click on the “Buy Now” button below. Once you pay, you will gain an instant access to the page!


Instant Access:

After you have purchased a paid page; PayPal is going to bring you back to my website. In order to see the paid page you have to click on the “Register” button, fill out the form, choose your own Username and Password and click on the “Register” button at the bottom of the form – congratulation, you are now on the page you have paid for! 

Important: After you have purchased any Paid page or Download page and PayPal brought you back to my website, the first thing that you should do is to save that page to your Favorites. Then if something goes wrong you always can come back to reregister yourself on my website again.

                                          Cold Air Return from Interior Wall

Finished Basement Edition is a new book designed just for you! In this book you can find answers to your most frequently asked questions about ductwork installation in basement and more.
For more information please visit Finished Basement Edition
page.

Two Cold Air Returns from Interior Wall (Installation in Pictures)

On this page, you can learn how to connect a cold air return to the wall that sits directly under the cold air duct and to the wall located under the panning.

On the page, you can see 17 pictures of the tools and materials and 16 pictures of installation that represent it in the step-by-step manner, in addition I've included some brief explanations, which made this page twice as valuable! 

In order to gain an access to the Two Cold Air Returns from Interior Wall (Installation in Pictures) page you have to pay an access fee of $2.37. Just click on the “Buy Now” button below. Once you pay, you will gain an instant access to the page!

Instant Access:

After you have purchased a paid page; PayPal is going to bring you back to my website. In order to see the paid page you have to click on the “Register” button, fill out the form, choose your own Username and Password and click on the “Register” button at the bottom of the form – congratulation, you are now on the page you have paid for!

Important: After you have purchased any Paid page or Download page and PayPal brought you back to my website, the first thing that you should do is to save that page to your Favorites. Then if something goes wrong you always can come back to re-register yourself on my website again.

 
    eBay
Copyright 2007 by Ductwork installation  Terms Of Use  Privacy Statement
DotNetNuke® is copyright 2002-2024 by DotNetNuke Corporation